4.90 9.7.2018 Bug fixes: Realtime clock Trim value corrections Enhancements: Long ECG support for new versions of DST centi-HRT (Vnr >= 31) DST milli-HRT (Vnr >= 31) 4.84 Created 24.5.2018 Bug fixes: DST micro-T16, temperature range report in RCI file. DST centi-HRT, temperature range report in RCI file. HR Import filter setup interface freeze. 4.80 Created 23.4.2018 Enhancements: DST micro-T16 (16bit) support. Bug fixes: A90 graph: The *.A90 graph was not being displayed. DST nano-T memory size: Calculations estimating memory usage were using a older definition. The DST nano-T V9 has 65k byte/43k measurements. Connection error RID related: If for any reason the RID becomes severely scrambled connection could be jeopardized. False connection RID related: If for some reason RID transfer was not completed correctly then under certain circumstances the logger could be defined as on-line. DST centi-ACT data overrun: When using ACT as primary and Temp as secondary restrictions on the secondary counter were lacking in Mercury. Secondary must be a even number and a divisor of the primary. DST centi-ACT and DST centi-HRT ACT temperature range definition error. In the RCI file the temperature range was reported incorrectly. Error message after Disconnect in Recorder Wizard: Sometimes a misleading popup message could appear after disconnecting: "EscapeComFunction failed". Retrieving ID halts in Recorder Wizard. Occasionally the recorder ID retrieval failed without a message. 4.73 Created 13.2.2018 Enhancements: Added import filter selection options for Tilt, Activity, ACC, ACT and A90. Colors in DAT and ACT are now matching. Blink with HR measurements is not an option any more. Bug fixes: Missing text in HAT files. No default import heart filter is now available. Previously a Blackbird filter was default. 4.71 Created 29.1.2018 Bug fixes: Fixed error where in some instances .RDT file was not created. 4.70 Created 20.1.2018 Enhancements: Added heart filters 4.64 Created 20.11.2017 Bug fixes: Fixed illegal input in New measurement sequence menu causing logical errors. Fixed error in DST centi-ACT histogram. 4.61 Created 9.10.2017 Enhancements: Added a new heart filter 80Hz for fish. Added restriction checks in the new measurements sequence interface for DST T-only logger types, DST HRT types and DST centi-ACT. Bug fixes: In the RDT and NMS files a time shift in the first measurement interval was displayed. This had nothing to do with the logger setup or it´s measurement sequence execution. 4.56 Created 25.9.2017 Bug fix Fixed battery calculations for Centi-HRT-ACT 4.53 Created 16.8.2017 Bug fix Features that were not meant to be in 4.52 removed pending further testing. 4.52 Created 3.8.2017 Bug fix In the recorder backup operation, battery settings did not hold. 4.49 Created 11-05-17 Enhancements: Change to Change text "Activity" to "ACT" For logic type loggers a new option for disabling limit check was included Changed test "HR meas. Buffers" to "ECG data" Points no longer automatically shown when opening HAT files 4.47 Created 04-04-17 Enhancements: Application version number is written into log file on start and exit Changed title of Activity reconvert dialog Changed data columns for activity (ACT) file Changed text of primary/secondary for heart loggers Widened the boxes in connection wizard Changed the interface for Activity reconvert definition Installer help files are now in recommended Changed "Tilt Boundary" to "External Acceleration (EAC)" Bug fixes: Chart axis were not correctly set when using primary/secondary sequence If application doesn't have write access in user directory then default directory is used Incorrect data convertion for burst DST centi-HRT ACT was missing activity menu Disabled possibility of enabling ECG when not taking heart measurement Disabled burst for DST milli-F versions under 15 DST centi-HRT ACT ECG conv error Primary/secondary convert didn't correctly use the last measurement taken if it was in RAM 4.46 Created 17-03-17 Enhancements: Changed text "ECG data" to "Save ECG data" Changed text "Number of meas." to "Number of measurements" DST centi v15 Micro-HRT RF v18 Bug fixes: Removed view activity files option for non-activity recorders DST centi v14 is a normal memory type only 4.45 Created 15-03-17 Enhancements: Changed text "Save buffer" is now "ECG data" Bug fixes: Incorrect burst data convertion Incorrect burst message count when connecting to recorder Removed burst option for DST centi-T When zooming with the mouse scroll the chart cursor did not always stay in frame Remove future values did not work correctly when reconverting Connection wizard didn't close after a successful SNMS when using multi mode 4.44 Created 15-02-17 Enhancements: Close connection wizard after a successfull SNMS Bug fixes: Error when running application from protected windows folders 4.43 Created 10-02-17 Bug fixes: Trim test is not supported by all recorders, now skips the test if not supported If trim test failed showed an incorrect message 4.42 Created 09-02-17 Recorders: DST centi-HRT ACT available Enhancements: Change recorder type is now a warning instead of an error message Heart recorders can be put in 1 second interval when not measuring heart Connection wizard now has a slight delay so that it is more able to find recorders out of battery Bug fixes: Gna was not able to read new group files 4.40 Created 14-12-16 Added long-term support (LTS) Added DST centi-ACT 4.28 Created 15-08-16 Enhancements: For DST milli-HRT and DST centi-HRT: Seconds available in measurement sequence. 4.27 Created 11-07-16 Bug fixes: For DST milli-HRT: Secondary counter calculation. For DST micro-HRT: Read data shift error. 4.24 Created 10-06-16 Bug fixes: For DST milli-HRT, memory calculations in NMS Enhancements: DST centi-HRT V1 support 4.23 Created 06-06-16 Enhancements: DST micro-HRT V18 support 4.22 Created 24-05-16 Bug fixes: In Mercury V4.20 the DST milli-HRT V5 the Eeprom memory was not defined correctly that resulted in two errors: Number of measurements in the recorder was incorrectly read. A shift was created in the data after retrieving 128 packs of data. Graph window zoom button set to disabled at start Graph window removed a stray label Enhancements: Remove logger window sets focus on OK button after timer Graph window now uses mouse wheel to zoom in and out by 15% Graph window now activates graph or table when the mouse is placed over it 4.20 Created 12-05-16 Enhancements: Start new measurement sequence now displays an image when finished, the dialog cannot be closed for 5 seconds while the user disconnects the recorder. Added color coding for chart tables Connection Wizard: Optimized detection speed and fixed an error detecting nano recorders. Windows: for each recorder text windows are now grouped together in a tabular window. Windows: for each recorder graphical windows are now grouped together in a tabular window. Mouse-right-click enables move to main window. DST milli-HRT 2MB flash memory support. Memory capacity in previous versions is: V4=65K and V5=130K. A list of all the HR and QI values, for the saved HR-measurement buffers (ECG signals), can be found in a *.RQI file. HR measurement frequency, as well as HR-buffer number and memory usage, is now shown in *.RIT,*.MIT,*.RDT,*.MDT and *.NMS files Bug fixes: Burst: Fixed cases where burst in multiple recording intervals was incorrect (DST centi) Sequence definition: Error messages are now restricted to the number of intervals used. Histogram: QI numbers are now shown. Sequence definition: Misleading error messages. In editing windows misleading "TD" options were removed. 4.10 Created 04-02-16 Connection Wizard: Type and serial can't be displayed if the logger was in measurement mode, displaying this information is removed 4.09 Created 01-02-16 Connection Wizard: Fixed an error where the baud rate would be incorrectly set causing Timeout on Command Echo Connection Wizard: Now displays Unavailable if that COM port is not accessible, for example used by another program Connection Wizard: Now when the icon turns green also displays the recorder type and serial 4.07 Created 20-11-15 New update system 4.06 Created Fixed an error causing that blocked running multiple instances of the program 4.05 Created 5-11-15 Added new export button to graph that creates an excel file in xslx format QI filter fixed an error where it didn't filter correctly 4.03 Created 15-10-15 Minor enhancements to the connection wizard (F11) 4.02 Created 27-03-15 DST micro-HRT, DST microRF-HRT and DST milli-HRT: fixed an error when using temperature as primary that resulted in a single measurement being added (DAB value 4095) 4.01 Created 19-03-15 Added seconds interval for DST micro-HRT (v 17) and DST milli-HRT (v 7) 4.00 Created 27-01-15 New installation and product verification 3.24 Created 27-01-15 Added support for DST milli-F-T 3.23 Created 15-12-14 Fixed a false version message, when connecting to Dst nano V10 3.22 Created 15-12-14 Fixed an error when connecting to a recorder with the connection wizard. 3.21 Created 17-10-14 Bug fixes: Fixed an error when converting data for multiple logger types 3.20 Created 14-10-14 Enhancements: Support for DST nano version 10 Bug fixes: Fixed a possible error when disabling gridlines Fixed an error in histogram where number of points and other values were not correctly calculated for primary/secondary Fixed an error in histogram where the default bin values were incorrect Failed tickets are now saved and can be sent as email attachements to support@star-oddi.com 3.19 Created 17-09-14 Bug fixes: Fixed a possible error when retrieving data 3.18 Created 12-09-14 Bug fixes: Fixed an error when retrieving data and pressing cancel Fixed the response time of using cancel when connecting to a recorder 3.17 Created 12-09-14 Bug fixes: Removed series click and statistics is now changed using horizontal gridlines Fixed an error where primary / secondary data was not displayed correctly Table is now fully visible on load COM port is now displayed correctly in the bottom panel 3.16 Created 02-09-14 Enhancements: DST milli-HRT support 3.15 Created 27-08-14 Enhancements: New connection wizard, shortcut key F11 New charts, faster loading Admin privileges are no longer required BDE is no longer used New recorder DST nanoRF-T Online measurement displays data visually in real time for: DST centi, DST milli, DST nano and DST micro 3.12 Created 23.06.14 Bug fix: Dst micro-HRT V11 has a setup error that is fixed via Mercury V3.12 Enhancement: New usere manuals for DST micro-HRT, DST microRF-HRT and DST milli-HRT 3.11 Created 17.06.14 Fixed an error that caused charts to show a maximum of 10,000 measurements 3.10 Created 16.06.14 Support for new Dst micro-HRT version 3.09 Created 04.06.14 Bug fix. Battery calculation was faulty when heart measurement buffer was saved in eeprom. This error only effects Dst micro-HRT, Dst microRF-HRT and Dst milli-HRT 3.08 Created 08.05.14 Bug fix. Dst micro-HRT and Dst milli-HRT version information update 3.07 Created 15.04.14 Bug fix. Error in heart filter constants 3.06 Created 15.04.14 Added enhancement: RF recorders: Measurements and RF-transmissions after memory full, included in battery energy estimation HRT recorders: DST micro-HRT V11, DST microRF-HRT V11 and Dst milli-HRT Energy cal: HR measurements energy calculations are now based on HR target frequancy. For example 100Hz takes 6 times longer than 600Hz. Extra HR: Extra HR measurement option in SNMS. If a HR measurement is "bad" the recorder, an extra measurement is only taken on user selction. Also extra HR measurement is only an option when sampling frequency > 300Hz 3.04 Created 27.03.14 Bug fixes. Important work-around for an unexpected battery drain during the start delay period: DST Micro-T V17 and DST Micro-RF V6, and only if they have been started in the year 2014. By using Mercury V3.04 this extra battery drainage is avoided. MID file creation: MID file was not created if no data in recorder but data retrieved according to user def. Added enhancement: RID comparison used in connecting to recorder: If the CRC test fails twice but RID comparison between the two RID´s retrieved, is a 100% match, then the RID transfer and the connection is deemed OK. The reason for this is that when a start procedure is halted midways, a new RID has partly been uploaded to the logger and the CRC number will therefore inevitably be corrupt. 3.00 Created 15.02.14 Added support/enhancements for: DST micro-HRT V11 and DST microRF-HRT V11 Bigger memory More energy efficient HR calculations Disable doubble heart measurement option RF-calculations NMS estimation on battery usage includes RF-transmission after memory full Bug fixes. Synchronization of some logger names in Mercury with the SO website: This has bearing on logger directories and help files. New subdirectories with new logger type names will be created. Previous measurements are intact in older directories. Changes are as follows: DST micro-RF -> DST microRF-T DST micro-HRT-RF -> DST microRF-HRT DST nano-RF -> DST nanoRF-T DAC error: If a serious error (like floating point error) occurs in conversion the DAC file is not closed. This error was introduced in V2.98 New logger names check: The new logger names UHL, UHT and MHL where not recogniced when selecting a recorder 2.98 Created 28.01.14 Extra support for DST micro-HRT V9 Support for DST nano-RF V1 2.93 Created 21.11.13 New Reconversion HR(Heart Rate) filter options. Applies to DST micro-HRT, DST micro-HRT-RF and DST milli-HRT 2.89 Created 02.10.13 Added support for DST micro-HRT V9 Added support for DST micro-HRT-RF V9 Added support for DST milli-HRT V1 2.83 Added support for DST Micro Version 17 2.80 Created 23.05.13 New Option: PNG A new chart image format option, PNG is now awailable. Bug fix: Changing bottom axis text. Problem in loading a chart template has been resolved. 2.79 Created 10.05.2013 Dst HRT support Dst HRT measures Temperature and Heart Rate. Bug Fix: Fixed an issue with sending groups to Gná 2.75 Created 28-01-13 Moved reconvert option: Options for Temperature Correction when "Temperature is Outside Calibration Range" (TOCR) that was previously in was moved to . 2.64 Minor Bug fixes: When installing from a CD, the shortcuts working directory on Desktop and Start Menu was not set correctly. Therefore SeaStar´s default file structure was created in the shortcut directory. This has now be corrected. This bug appeared in V2.50 2.63 Minor Bug fix: If for some odd reason, the battery-life left registers in the recorder are zero, then the NMS battery calculation did not function correctly. This bug appeared in V2.62 2.62 Bug fix: For Dst micro V11 a change was made in the real time clock (RTC) configuration. This means changes in the recorder registers, in the information data section (RID). SeaStar has not handled these changes correctly. This has been mended. New Wizard: A new menu item "Change battery Life" in the Wizard menu, is now available. This wizard was introduced to enable changes to a corrupt "Battery eneregy" register in the recorder. General User Interface (GUI) Changes: The "Reconvert definition" in the Settings menu was changed to "View Data". The two viewing related items in the "Retrieve Data" definition where moved to the "View Data" window. 2.60 Screenshots Submit ticket Temperature response time shift Minor changes Clock drift calculations update. Update now tries 3 times to connect before resulting in a failure. 2.50 The result of data retrieval is now logged, bytes received X of Y. OOR forms were redesigned. Fixed a bug where reconvert would be disabled after a logger measurement was selected. Fixed a bug where "Save Window Data" would have an incorrect destination folder after reconversion. 2.25 Major Changes Minor Changes Battery life estimation for the DST nano recorder has been improved. 2.21 Major Changes Minor Changes ChangeLog is displayed if a new application version is available while updating. Application file size is now correctly displayed when updating. Spelling errors. Active series now allows the user to right click and select: all, none, invert. Low battery warning when starting a new measurement sequence if the battery level is below 20%. Wizards: if multi mode is active then the start new measurement settings is skipped and if completed successfully offers to repeat the wizard. Wizards: Added a notification to remind users to put the recorder in the communication box. Log files (Application log and SNMS) have been moved to a submenu "Log Files" under View. If multi mode is active and the new measurement sequence starting time is less than 2 minutes away then the multi mode is deactivated. Wizards: Fixed an error where the wizards would not start when the recorder was already connected. Import now allows multiple files to be selected. Improved check for corrupted registers.