6.30 Created 14.03.23 Mercury V6.30 is validated for DST nano-T and DST micro-T16 Bug fixes: 1) When starting a logger from the Wizard and an error occurred, then Mercury could "exit" incorrectly. Sometimes an application error was reported and consequently sometimes Mercury froze. 2) Inadequate subtype detection. 3) Under specific condition a false POR alarm could be raised for DST milli-HRT ACT 6.24 Created 09.12.22 Mercury V6.24 is validated for DST nano-T and DST micro-T16 Bug fixes: 1) Reconvert progress-window could freeze. 2) Error in Submitting Tickets. A hardcoded IP-address is now used. 3) Long term battery energy estimation was overrated in DST centi-act G2 Correction was also applied to DST milli-ACT and DST micro-ACT Enhancements: 1) DST centiAT-HRT supported 2) Dst centi-HRT ACT G2 V37 (deci housing) support 3) Download help-files under Help. 4) DST micro-HRT G2 now default in pre-deploy calc 5) HR-circuitry amplification information in RIT files 6) Simplified Reconvert HR filtering UI 6.14 Created 06.04.22 Mercury V6.14 is validated for DST nano-T and DST micro-T16 Bug fixes: 1) Data reconvert def. Init-error. Using "Current new measurement sequence definition" was not initialized, between selecting new recorder or new type. 2) DAD -> DAT info-window could freeze. 3) EA values in graphs(abs, max,min,avg) did not have the propper unit (mg) attached. Enhancements: 1) A new interface theme has been applied to Mercury. With refreshing changes to icons, colours and fonts. 2) New option: Disable copying of Reconvert files to sequence subfolders. This option can be found under: Settings>Options>Conversion 3) MID and MDT are now copied to sequence subfolders. 4) Minutes and seconds are now optional along with milli seconds in online measurements. 5) Minute Interval Times restriction was 2min but now 1min alloved if Acc sampling <= 1Hz This applies to: DST centi-ACT G2, DST milli-ACT and DST micro-ACT 5.99 Created 10.8.21 Bug fixes: 1) Fixed a erroneous error message: File is empty or corrupt 5.98 Created 22.07.21 Mercury V5.98 is validated for DST nano-T, DST micro-T and DST micro-T16 Bug fixes: 1) Template not always read correctly. Count-index in the Template file list could become corrupt. 2) Save button in Graph Window, filename error Header reading error could occur resulting in a filename error. 3) Convert -> DAT information window occasional freeze 4) Small Reconvert information window removed This was an unnecessary information window 5) Settings>Options default settings "overtake" In certain circumstances default settings could be reset in Settings>Options 6) New Header Date-Time separation indication Separation was not always performed in the data file according to header definition Enhancements: 1) Zoom-total back => disable points In graph window on user "Full zoom out action" points are disabled 2) DST centi-HRT ACT V37 128Mb memory support 3) Export to Excel button in graphs improvements. 4) CSV export button in graphs 5) Re/Convert information window now has Progress bar 6) Better RAM access (2GB->3GB/4GB) 7) Data to graph window now has Progress bar 8) HR filter information improvements in text files 9) Option for NMS-file: Simplified battery&energy estimation presentation. 10) Widened interval sampling restrictions for HRT and HRT-ACT loggers. 5.90 Created 31.03.21 Bug fixes: 1) Minimum measurement interval restriction adjusted to: Long ECG HRT loggers New ACT logger types 2) Time-stamp in HAT files changed/corrected to have 1ms resolution 3) Min BPM in FLT files was not always read correctly when long ECG was selected. 4) ACT, TNR, ACC and ACT files support for DST micro-ACT 5) Minor changes to text in HRT files. Enhancements: 1) In NMS-CalcDef a (G2) indication is added to the latest DST micro-HRT version. 2) Rearranged "New File type" drop down list 3) DST centi-ACT G2 new logger type support 4) Old battery warning 5) Mored detailed Smart-Erase log file and window messages . 5.83 Created 27.01.21 Mercury v5.83 update does not affect DST nano-T/micro-T/micro-T-16bit Bug fixes: 1) Mercury battery usage estimation. When saving ECG records the battery usage was under-estimated. This affected DST centi-HRT, DST milli-HRT, DST micro-HRT and DST microRF-HRT. This bug was introduced in Mercury 5.47. 2) Minor text changes menus and result-files like RCI. Mainly related to tilt/activity like origo->midrange value and AveEA->AvgEA 3) Statistical data section in MIT and CIT could give erroneous result with certain loggers when multiple intervals were applied. The Statistical data section was removed. Users can enjoy statistics in DAT and DAB graphs via histogram button. Enhancements: 1) Primary/Secondary support for DST milli-ACT and DST micro-ACT 2) Improved AvgEA and MaxEA correction for DST milli-ACT, DST milli-HRT ACT, DST centi-HRT ACT G2 and DST micro-ACT. 5.78 Created 17.12.20 Mercury v5.78 update does not effect DST nano-T/micro-T/micro-T-16bit Bug fixes: 1) Zoom error in on-line measurements. Sometimes the zoom would not react. 2) Sometimes the View on-line data operation would fail: (*.ONL) not found. 3) Under certain circumstances an error in view on-line data could occur : "Not a valid date and time" 4) On-line unit OOR correction could give misleading data. 5) DST centi-HRT ACT time shift correction, with an option in reconvert data definition. 6) Sometimes a Reconvert option was available when changing recorder types, although no sequence was selected. 7) Milli-ACT a correction option is now available for AveEA and MaxEA in Reconvert. 8) DST milli-ACT batt. calculation average 20% correction. 5.70 Created 03.11.20 Mercury V5.70 is validated for DST nano-T, DST micro-T and DST micro-T16 Bug fixes: 1) Skip Invalid measurements not always working 2) Error in DAB file histograms 3) "Moving DAT to graph" message window can freeze 4) Error in DST milli-HRT ACT conversion 5) Micro-T GUI settings error in "NMS time and energy" 6) Before connection in Connection Wizard loggers were placed in PC-Mode 7) DST centi-HRT ACT: Var and ACT error when range is limited in reconversion 8) On-line measurements range check error in DST micro-T 9) "Converting data" message window can freeze 10) Blank test after SmartErase gave false error alarm. 11) Error in ACC-record definition in RIT and MIT files 12) Sometimes no return on error to New Measurement Sequence Definition window 13) Time shift correction option for seconds interval in DST centi-HRT ACT Enhancements: 1) Restriction on blank Flash memory values. 2) Reminder "Logger Now not in measurement mode" after connection 3) Text in RF-setup made more descriptive 4) DST micro-ACT support 5) DST centi-HRT ACT G2 (Generation 2: Activity calculations in logger) support 5.59 Created 13.07.20 Mercury v5.59 update does not effect DST nano-T/micro-T/micro-T-16bit Bug fixes: 1) Bubble comments not always cleared in GUI on OK and Cancel 2) Error in Milli-HRT ACT battery calculations when T+ACT selected 3) Error in Milli-HRT ACT battery calculations Normal 1Hz vs. 10Hz 4) Dive option removed in reconvert def. GUI 5) DST milli-F-T: PS-GUI option removed Option appeared in NMS when recorder was not selected nor on-line 6) Battery calculation trimmed with recorder versions This relates to DST milli-HRT, DST centi-HRT and DST centi-HRT ACT 7) Update check message box now on timer 8) Numbers in the A90 Measurement column not correct 9) Help files update error Files were placed in HelpFiles directory instead of Hlp directory 10)"Date is less than .." error message after 'On-line" button selection. This button was available in a Measurement sequence definition GUI, when the logger was on-line. This option has now been replaced by the "Default" option. 11)Repeated false RID message = "wrong number of measurements" 12)Error in logger time vs. PC-time to check future-time measurement in reconvert. User can define number of byte to retrieve so measurements can end in the future. 5.47 Created 07.04.20 Bug fixes 1) Histogram Tilt Tilt would not show -90,-60,+-20,60,90 bins 2) DST nano RIT file showed 1 minute shift in start time. 3) DST nano RIT file showed to much battery usage 4) DST micro showed 1 meas to much in DAT after data retrieval 5) DST nano on-line measurements froze 6) An Excel-button created Excel-file had a copy to other workbooks/sheets error A message said: "This action won´t work on multiple selections". 7) OOR-max-bin def. not right for all logger-types 8) At connection time not always the right number of measurements taken reported. 9) RIT/MIT sometimes (depending on version) wrong DST Nano-T memory capacity def. reported 10) NMS file calculation reported wrongfully: Out of memory. 11-18: Relates to DST milli-HRT ACT 11) HR definition missing in setup definition 12) Error in battery calculations in NMS file. 13) Print-out errors in NMS file, like Save Acc missing 14) NMS-file cycle-calculations printout errors 15) NMS-file does not match RDT/MDT-files 16) Multiple interval option errors 17) NMS-file printout error: With T+HR as primary ACT Acc-Nr values are shown 18) Setup-error: Minutes to seconds "conversion" when changing froma a "continuous option logger-type" to DST milli-HRT ACT This was traced to variable "bleeding" between logger-types. 19) Settings>Preferences>NMS Time and energy calc. update/correction This (19) was related to DST nano-T, DST micro-T and DST micro-T16 20) In Settings>Preferences>Units> for Centi-ACT, Milli-ACT and Milli-HRT ACT P units were included. 21) Error in ACT file. This relates to DST milli-HRT ACT, DST milli-ACT, DST centi-ACT and DST centi-HRT AC Relative values for X,Y and Z were shown instead of nominal values 22) Single interval PS options adjustment This relates to Dst centi-HRT, Dst milli-HRT, Dst micro-HRT and Dst milli-HRT ACT 23) RIT/MIT ECG memory usage report error + various printout error This relates to DST micro-HRT, DST milli-HRT, DST centiHRT and DST milli-HRT ACT Enhancements: 1) Added support for big memory (2Mb) for DST micro-T16 (V40) 2) Flash memory blank test after Flash-Erase operation in SNMS. 5.27 Created 04.10.19 Bug fixes Import HeartFilter was not updated in a logger correctly. This is relevant for: DST milli-HRT V31 DST centi-HRT V31 5.26 Created 16.09.19 Bug fixes: Relates to DST milli-HRT ACT. Wrong text on axis QI and HR in DAT-graph Wrong text in QI-histogram Time-tags on tilt values in A90-graph were shifted 5.20 Created 12.6.19 Bug fixes: Relates to DST milli-ACT and DST milli-HRT ACT. Miner corrections in NMS files. Battery calculations update. Improved setup forms. 5.07 Created 22.4.19 Enhancements: New logger supported DST milli-HRT ACT Bug fixes: There was an error in battery calculation related to heart filters. The calculation in the NMS file was OK, but upon logger reconnection with low frequency filters and after long deployment, the battery estimation could be too low. 5.00 Created 21.2.19 Enhancements: Support for DST milli-ACT. Optimization of long ECG measurment parameters. Bug fix: Fixed error causing Smart Erase function to terminate. 4.94 Created 4.12.2018 Enhancements: A new function, Smart Erase, is now active after a lengthy test period. The function minimizes the Flash memory erase time. This is relevant for: DST milli-HRT, DST centi-HRT, DST centi-HRT ACT, DST centi-ACT and DST milli-ACT. Bug fix: - Excessive current consumption in countdown to start measuring minimized in DST nano-RF V3 by slowing down the process. - Ticket system fix. The ticket system was inactive due to changes in Star-Oddi IT-system changes. The ticket functions in Mercury have now been adapted to the new Star-Oddi IT system 4.91 Created 25.7.2018 Enhancements: Support for new logger DST milli-ACT 4.90 Created 9.7.2018 Bug fixes: Realtime clock Trim value corrections Enhancements: Long ECG support for new versions of DST centi-HRT (Vnr >= 31) DST milli-HRT (Vnr >= 31) 4.84 Created 24.5.2018 Bug fixes: DST micro-T16, temperature range report in RCI file. DST centi-HRT, temperature range report in RCI file. HR Import filter setup interface freeze. 4.80 Created 23.4.2018 Enhancements: DST micro-T16 (16bit) support. Bug fixes: A90 graph: The *.A90 graph was not being displayed. DST nano-T memory size: Calculations estimating memory usage were using a older definition. The DST nano-T V9 has 65k byte/43k measurements. Connection error RID related: If for any reason the RID becomes severely scrambled connection could be jeopardized. False connection RID related: If for some reason RID transfer was not completed correctly then under certain circumstances the logger could be defined as on-line. DST centi-ACT data overrun: When using ACT as primary and Temp as secondary restrictions on the secondary counter were lacking in Mercury. Secondary must be a even number and a divisor of the primary. DST centi-ACT and DST centi-HRT ACT temperature range definition error. In the RCI file the temperature range was reported incorrectly. Error message after Disconnect in Recorder Wizard: Sometimes a misleading popup message could appear after disconnecting: "EscapeComFunction failed". Retrieving ID halts in Recorder Wizard. Occasionally the recorder ID retrieval failed without a message. 4.73 Created 13.2.2018 Enhancements: Added import filter selection options for Tilt, Activity, ACC, ACT and A90. Colors in DAT and ACT are now matching. Blink with HR measurements is not an option any more. Bug fixes: Missing text in HAT files. No default import heart filter is now available. Previously a Blackbird filter was default. 4.71 Created 29.1.2018 Bug fixes: Fixed error where in some instances .RDT file was not created. 4.70 Created 20.1.2018 Enhancements: Added heart filters 4.64 Created 20.11.2017 Bug fixes: Fixed illegal input in New measurement sequence menu causing logical errors. Fixed error in DST centi-ACT histogram. 4.61 Created 9.10.2017 Enhancements: Added a new heart filter 80Hz for fish. Added restriction checks in the new measurements sequence interface for DST T-only logger types, DST HRT types and DST centi-ACT. Bug fixes: In the RDT and NMS files a time shift in the first measurement interval was displayed. This had nothing to do with the logger setup or it´s measurement sequence execution. 4.56 Created 25.9.2017 Bug fix Fixed battery calculations for Centi-HRT-ACT 4.53 Created 16.8.2017 Bug fix Features that were not meant to be in 4.52 removed pending further testing. 4.52 Created 3.8.2017 Bug fix In the recorder backup operation, battery settings did not hold. 4.49 Created 11-05-17 Enhancements: Change to Change text "Activity" to "ACT" For logic type loggers a new option for disabling limit check was included Changed test "HR meas. Buffers" to "ECG data" Points no longer automatically shown when opening HAT files 4.47 Created 04-04-17 Enhancements: Application version number is written into log file on start and exit Changed title of Activity reconvert dialog Changed data columns for activity (ACT) file Changed text of primary/secondary for heart loggers Widened the boxes in connection wizard Changed the interface for Activity reconvert definition Installer help files are now in recommended Changed "Tilt Boundary" to "External Acceleration (EAC)" Bug fixes: Chart axis were not correctly set when using primary/secondary sequence If application doesn't have write access in user directory then default directory is used Incorrect data convertion for burst DST centi-HRT ACT was missing activity menu Disabled possibility of enabling ECG when not taking heart measurement Disabled burst for DST milli-F versions under 15 DST centi-HRT ACT ECG conv error Primary/secondary convert didn't correctly use the last measurement taken if it was in RAM 4.46 Created 17-03-17 Enhancements: Changed text "ECG data" to "Save ECG data" Changed text "Number of meas." to "Number of measurements" DST centi v15 Micro-HRT RF v18 Bug fixes: Removed view activity files option for non-activity recorders DST centi v14 is a normal memory type only 4.45 Created 15-03-17 Enhancements: Changed text "Save buffer" is now "ECG data" Bug fixes: Incorrect burst data convertion Incorrect burst message count when connecting to recorder Removed burst option for DST centi-T When zooming with the mouse scroll the chart cursor did not always stay in frame Remove future values did not work correctly when reconverting Connection wizard didn't close after a successful SNMS when using multi mode 4.44 Created 15-02-17 Enhancements: Close connection wizard after a successfull SNMS Bug fixes: Error when running application from protected windows folders 4.43 Created 10-02-17 Bug fixes: Trim test is not supported by all recorders, now skips the test if not supported If trim test failed showed an incorrect message 4.42 Created 09-02-17 Recorders: DST centi-HRT ACT available Enhancements: Change recorder type is now a warning instead of an error message Heart recorders can be put in 1 second interval when not measuring heart Connection wizard now has a slight delay so that it is more able to find recorders out of battery Bug fixes: Gna was not able to read new group files 4.40 Created 14-12-16 Added long-term support (LTS) Added DST centi-ACT 4.28 Created 15-08-16 Enhancements: For DST milli-HRT and DST centi-HRT: Seconds available in measurement sequence. 4.27 Created 11-07-16 Bug fixes: For DST milli-HRT: Secondary counter calculation. For DST micro-HRT: Read data shift error. 4.24 Created 10-06-16 Bug fixes: For DST milli-HRT, memory calculations in NMS Enhancements: DST centi-HRT V1 support 4.23 Created 06-06-16 Enhancements: DST micro-HRT V18 support 4.22 Created 24-05-16 Bug fixes: In Mercury V4.20 the DST milli-HRT V5 the Eeprom memory was not defined correctly that resulted in two errors: Number of measurements in the recorder was incorrectly read. A shift was created in the data after retrieving 128 packs of data. Graph window zoom button set to disabled at start Graph window removed a stray label Enhancements: Remove logger window sets focus on OK button after timer Graph window now uses mouse wheel to zoom in and out by 15% Graph window now activates graph or table when the mouse is placed over it 4.20 Created 12-05-16 Enhancements: Start new measurement sequence now displays an image when finished, the dialog cannot be closed for 5 seconds while the user disconnects the recorder. Added color coding for chart tables Connection Wizard: Optimized detection speed and fixed an error detecting nano recorders. Windows: for each recorder text windows are now grouped together in a tabular window. Windows: for each recorder graphical windows are now grouped together in a tabular window. Mouse-right-click enables move to main window. DST milli-HRT 2MB flash memory support. Memory capacity in previous versions is: V4=65K and V5=130K. A list of all the HR and QI values, for the saved HR-measurement buffers (ECG signals), can be found in a *.RQI file. HR measurement frequency, as well as HR-buffer number and memory usage, is now shown in *.RIT,*.MIT,*.RDT,*.MDT and *.NMS files Bug fixes: Burst: Fixed cases where burst in multiple recording intervals was incorrect (DST centi) Sequence definition: Error messages are now restricted to the number of intervals used. Histogram: QI numbers are now shown. Sequence definition: Misleading error messages. In editing windows misleading "TD" options were removed. 4.10 Created 04-02-16 Connection Wizard: Type and serial can't be displayed if the logger was in measurement mode, displaying this information is removed 4.09 Created 01-02-16 Connection Wizard: Fixed an error where the baud rate would be incorrectly set causing Timeout on Command Echo Connection Wizard: Now displays Unavailable if that COM port is not accessible, for example used by another program Connection Wizard: Now when the icon turns green also displays the recorder type and serial 4.07 Created 20-11-15 New update system 4.06 Created Fixed an error causing that blocked running multiple instances of the program 4.05 Created 5-11-15 Added new export button to graph that creates an excel file in xslx format QI filter fixed an error where it didn't filter correctly 4.03 Created 15-10-15 Minor enhancements to the connection wizard (F11) 4.02 Created 27-03-15 DST micro-HRT, DST microRF-HRT and DST milli-HRT: fixed an error when using temperature as primary that resulted in a single measurement being added (DAB value 4095) 4.01 Created 19-03-15 Added seconds interval for DST micro-HRT (v 17) and DST milli-HRT (v 7) 4.00 Created 27-01-15 New installation and product verification 3.24 Created 27-01-15 Added support for DST milli-F-T 3.23 Created 15-12-14 Fixed a false version message, when connecting to Dst nano V10 3.22 Created 15-12-14 Fixed an error when connecting to a recorder with the connection wizard. 3.21 Created 17-10-14 Bug fixes: Fixed an error when converting data for multiple logger types 3.20 Created 14-10-14 Enhancements: Support for DST nano version 10 Bug fixes: Fixed a possible error when disabling gridlines Fixed an error in histogram where number of points and other values were not correctly calculated for primary/secondary Fixed an error in histogram where the default bin values were incorrect Failed tickets are now saved and can be sent as email attachements to support@star-oddi.com 3.19 Created 17-09-14 Bug fixes: Fixed a possible error when retrieving data 3.18 Created 12-09-14 Bug fixes: Fixed an error when retrieving data and pressing cancel Fixed the response time of using cancel when connecting to a recorder 3.17 Created 12-09-14 Bug fixes: Removed series click and statistics is now changed using horizontal gridlines Fixed an error where primary / secondary data was not displayed correctly Table is now fully visible on load COM port is now displayed correctly in the bottom panel 3.16 Created 02-09-14 Enhancements: DST milli-HRT support 3.15 Created 27-08-14 Enhancements: New connection wizard, shortcut key F11 New charts, faster loading Admin privileges are no longer required BDE is no longer used New recorder DST nanoRF-T Online measurement displays data visually in real time for: DST centi, DST milli, DST nano and DST micro 3.12 Created 23.06.14 Bug fix: Dst micro-HRT V11 has a setup error that is fixed via Mercury V3.12 Enhancement: New usere manuals for DST micro-HRT, DST microRF-HRT and DST milli-HRT 3.11 Created 17.06.14 Fixed an error that caused charts to show a maximum of 10,000 measurements 3.10 Created 16.06.14 Support for new Dst micro-HRT version 3.09 Created 04.06.14 Bug fix. Battery calculation was faulty when heart measurement buffer was saved in eeprom. This error only effects Dst micro-HRT, Dst microRF-HRT and Dst milli-HRT 3.08 Created 08.05.14 Bug fix. Dst micro-HRT and Dst milli-HRT version information update 3.07 Created 15.04.14 Bug fix. Error in heart filter constants 3.06 Created 15.04.14 Added enhancement: RF recorders: Measurements and RF-transmissions after memory full, included in battery energy estimation HRT recorders: DST micro-HRT V11, DST microRF-HRT V11 and Dst milli-HRT Energy cal: HR measurements energy calculations are now based on HR target frequancy. For example 100Hz takes 6 times longer than 600Hz. Extra HR: Extra HR measurement option in SNMS. If a HR measurement is "bad" the recorder, an extra measurement is only taken on user selction. Also extra HR measurement is only an option when sampling frequency > 300Hz 3.04 Created 27.03.14 Bug fixes. Important work-around for an unexpected battery drain during the start delay period: DST Micro-T V17 and DST Micro-RF V6, and only if they have been started in the year 2014. By using Mercury V3.04 this extra battery drainage is avoided. MID file creation: MID file was not created if no data in recorder but data retrieved according to user def. Added enhancement: RID comparison used in connecting to recorder: If the CRC test fails twice but RID comparison between the two RID´s retrieved, is a 100% match, then the RID transfer and the connection is deemed OK. The reason for this is that when a start procedure is halted midways, a new RID has partly been uploaded to the logger and the CRC number will therefore inevitably be corrupt. 3.00 Created 15.02.14 Added support/enhancements for: DST micro-HRT V11 and DST microRF-HRT V11 Bigger memory More energy efficient HR calculations Disable doubble heart measurement option RF-calculations NMS estimation on battery usage includes RF-transmission after memory full Bug fixes. Synchronization of some logger names in Mercury with the SO website: This has bearing on logger directories and help files. New subdirectories with new logger type names will be created. Previous measurements are intact in older directories. Changes are as follows: DST micro-RF -> DST microRF-T DST micro-HRT-RF -> DST microRF-HRT DST nano-RF -> DST nanoRF-T DAC error: If a serious error (like floating point error) occurs in conversion the DAC file is not closed. This error was introduced in V2.98 New logger names check: The new logger names UHL, UHT and MHL where not recogniced when selecting a recorder 2.98 Created 28.01.14 Extra support for DST micro-HRT V9 Support for DST nano-RF V1 2.93 Created 21.11.13 New Reconversion HR(Heart Rate) filter options. Applies to DST micro-HRT, DST micro-HRT-RF and DST milli-HRT 2.89 Created 02.10.13 Added support for DST micro-HRT V9 Added support for DST micro-HRT-RF V9 Added support for DST milli-HRT V1 2.83 Added support for DST Micro Version 17 2.80 Created 23.05.13 New Option: PNG A new chart image format option, PNG is now awailable. Bug fix: Changing bottom axis text. Problem in loading a chart template has been resolved. 2.79 Created 10.05.2013 Dst HRT support Dst HRT measures Temperature and Heart Rate. Bug Fix: Fixed an issue with sending groups to Gna 2.75 Created 28-01-13 Moved reconvert option: Options for Temperature Correction when "Temperature is Outside Calibration Range" (TOCR) that was previously in was moved to . 2.64 Minor Bug fixes: When installing from a CD, the shortcuts working directory on Desktop and Start Menu was not set correctly. Therefore SeaStar´s default file structure was created in the shortcut directory. This has now be corrected. This bug appeared in V2.50 2.63 Minor Bug fix: If for some odd reason, the battery-life left registers in the recorder are zero, then the NMS battery calculation did not function correctly. This bug appeared in V2.62 2.62 Bug fix: For Dst micro V11 a change was made in the real time clock (RTC) configuration. This means changes in the recorder registers, in the information data section (RID). SeaStar has not handled these changes correctly. This has been mended. New Wizard: A new menu item "Change battery Life" in the Wizard menu, is now available. This wizard was introduced to enable changes to a corrupt "Battery eneregy" register in the recorder. General User Interface (GUI) Changes: The "Reconvert definition" in the Settings menu was changed to "View Data". The two viewing related items in the "Retrieve Data" definition where moved to the "View Data" window. 2.60 Screenshots Submit ticket Temperature response time shift Minor changes Clock drift calculations update. Update now tries 3 times to connect before resulting in a failure. 2.50 The result of data retrieval is now logged, bytes received X of Y. OOR forms were redesigned. Fixed a bug where reconvert would be disabled after a logger measurement was selected. Fixed a bug where "Save Window Data" would have an incorrect destination folder after reconversion. 2.25 Major Changes Minor Changes Battery life estimation for the DST nano recorder has been improved. 2.21 Major Changes Minor Changes ChangeLog is displayed if a new application version is available while updating. Application file size is now correctly displayed when updating. Spelling errors. Active series now allows the user to right click and select: all, none, invert. Low battery warning when starting a new measurement sequence if the battery level is below 20%. Wizards: if multi mode is active then the start new measurement settings is skipped and if completed successfully offers to repeat the wizard. Wizards: Added a notification to remind users to put the recorder in the communication box. Log files (Application log and SNMS) have been moved to a submenu "Log Files" under View. If multi mode is active and the new measurement sequence starting time is less than 2 minutes away then the multi mode is deactivated. Wizards: Fixed an error where the wizards would not start when the recorder was already connected. Import now allows multiple files to be selected. Improved check for corrupted registers.